Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found
Pros & Cons
pros
See Details
pros
See Details
Print Quality
Customers have generally positive opinions about the print quality of this ABS filament. Many report that their prints come out well with good consistency and minimal warping. Some customers mention that color transitions take a long time to fade between colors, making it less suitable for small projects with quick color changes. Others note that the filament has a slight odor but is still an improvement over other ABS brands they have used in terms of print quality and lack of strong smell.
neutral
See Details
neutral
See Details
Color Consistency
Customers have mixed opinions on the color consistency of this ABS filament. While some are pleased with the consistent performance and adhesion to the main body, others have reported inconsistencies in the actual color representation between the spool and the final print. Some customers have received the correct colors while others have not, resulting in disappointment.
Filament Clogging
Customers have mixed opinions on the ABS Filament's tendency to clog, with some reporting successful prints and others experiencing frequent clogs. Some users suggest using it for cleaning out nozzles or between different filaments, while others caution against its propensity for clogging and poor quality.
Highlights
Quality
I created a few nano products using this filament and the quality is so far so good.
Decent quality abs with good consistency and printability.
It failed in every way, parts separated when they printed at all, hatch box same except perfect prints
It purges so much crap stuck in my printer that i had no clue was even there!
Price
)good stuff and much cheaper than other brands.
The price to performance is the best that i have come across.
I bought my first role to print some fixtures, not expecting too much of it because of the low price.
Packaging/appearance
Came as described, and is the correct itemto clean my 3d printer nozzles.
The packaging is similar to other brands and should fit most 3d printers.
Roll was a little sloppy looking rolled up but wasn't tangled.
Competitiveness
Definitely other brands with a brighter red than this.
(see photo for comparison to jet black.
Overview
- How are reviewers describing this item?
color, good, great, little and tried. - Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
- Our engine has discovered that over 80% high quality reviews are present.
- This product had a total of 1,100 reviews as of our last analysis date on Nov 1 2024.
Helpful InsightsBETA
Posted by a reviewer on Amazon
For 11 prints on the bl x1c set the scale tox 100
Posted by a reviewer on Amazon
Clogs after switching back to pla from carbon fiber
Posted by a reviewer on Amazon
I bought my first role to print some fixtures not expecting too much of it because of the low price
Posted by a reviewer on Amazon
I run a bambu lab p1s and print at 235c nozzle and 100c bed temps and the only failures ive had have been related to user error
Posted by a reviewer on Amazon
I normally use esun and inland made by esun filament
Posted by a reviewer on Amazon
I wanted to print something in three different colors red white and blue but microcenter was out of blue
Review Count History
Price History
Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found