Highlights
Quality
This small wizard can reduce feedback, compress audio, power a phatom mic and provide preamplification that is quiet and clean.
Set up correctly, the shark does a great job with compression, limiting, low-frequency roll-off, and background noise gating.
The attenuator was needed for two reasons: the output with the "output" button in the "mic" position was very low.
With the system cranked wide open, and the sharks engaged, the auto mode worked absolute wonders on the test subject walking ar... Read More
Overview
- How are reviewers describing this item?
level, small, set, front and needed. - Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
- Our engine has discovered that over 80% high quality reviews are present.
- This product had a total of 6 reviews as of our last analysis date on Nov 12 2024.
Helpful InsightsBETA
Posted by a reviewer on Amazon
It also provides variable 16 bit delay and an audio gate that can 34mute34 the output until there the input threshold is met
Posted by a reviewer on Amazon
A lot of processing in a very small box
Posted by a reviewer on Amazon
I found the instructions in the user manual adequate for all but the clipping function it wasnt obvious that the 34mic gain34 pot on the rear panel sets the level of the audio going through the shark while the 34clip level34 pot on the front panel seems to work as both a fine clip level setting and as an output level control
Posted by a reviewer on Amazon
I had to install a 25 db attenuator on the output line to allow me to set the mic gain high enough to approach the clippling level
Posted by a reviewer on Amazon
The attenuator was needed for two reasons the output with the 34output34 button in the 34mic34 position was very low
Posted by a reviewer on Amazon
So the attenuator was needed to knock the linelevel output down to mic level with the switch in the 344 dbu34 position