What does this mean?Pros & Cons
Pros
Works great with a skr v1. Using it with a bltouch, and 2 separated z steppers for auto leveling.
Cons
No status light to show that it is detecting filament movement. To add insult to injury, bigtreetech's website is a complete disaster. No product information, no installation instructions, no manual.
Highlights
Quality
I am using an ender 3 v2, with the jyersui firmware (a great upgrade btw).
Good quality for the price delivered on time
If your printer is rebooting after installing this and testing the sensor, stop screwing with the sensor and unplug it.
Be careful with the pin order where you plug it into the mini; annoyingly the pins grouped with the adc pc12 aren't labeled on ... Read More
Packaging/appearance
These plugged into the x-max end-stops and minor marlin 2.
Competitiveness
Working great, running connected directly to raspi i'm running octoprint on.
I'm also using this with a btt skr 1.
Bought this for use on a creality cr10-s but it doesn't work because the wiring is reversed and the signal circuit is incompatible.
The firmware i am using and i suspect the original creality firmware has the style of detection reversed.
Overview
- How are reviewers describing this item?
through and good. - Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
- Our engine has discovered that over 90% high quality reviews are present.
- This product had a total of 340 reviews as of our last analysis date on Dec 2 2022.
Helpful InsightsBETA
Posted by a reviewer on Amazon
The switch is not designed for the ender 3v2 but i bought 15 of them because i have 15 printers and i was bound and determined to make them work
Posted by a reviewer on Amazon
In the middle cut the white and black wires
Posted by a reviewer on Amazon
Connect white to black but not black to white
Posted by a reviewer on Amazon
Just don’t use the second set this gets rid of the light but who needs it and the printer sees it as a temp fault
Posted by a reviewer on Amazon
The color sequence at one end will be red black determined white the color sequence at the other end will be red determined black and white which is connected to the black
Posted by a reviewer on Amazon
Gently pry apart the switch housing with a small screwdriver
Posted by a reviewer on Amazon
On the switch cut and bend out the two outside contacts
Posted by a reviewer on Amazon
On the harness connector cut and bend out the two outside metal prongs as well
Review Count History
Add Fakespot to your browser, Secure Shopping on the go.
Download Fakespot for Browsers
