This spindle works perfectly for that purpose, and it can perform these functions at a great speed and accuracy.

This spindle works perfectly for that purpose, and it can perform these functions at a great speed and accuracy.  Read Less

I haven't measured runout but just by moving it by hand it's very solid and so far has cut flawlessly for me.

I haven't measured runout but just by moving it by hand it's very solid and so far has cut flawlessly for me.  Read Less

The controller board has a spindle motor output from 0 to 24volts and this motor controller needs a 0 to 10volt signal to control speed.

The controller board has a spindle motor output from 0 to 24volts and this motor controller needs a 0 to 10volt signal to control speed.  Read Less

The mount is pretty useless unless you design around it and i ended up making my own.

The mount is pretty useless unless you design around it and i ended up making my own.  Read Less

One thing i would change is to lower the price to about $110 or so and only offer a few collets (1/8, 1/4, 5/16 and maybe a 4mm).

One thing i would change is to lower the price to about $110 or so and only offer a few collets (1/8, 1/4, 5/16 and maybe a 4mm).  Read Less

Packed nicely in a well thought out styrofoam box insert.

Packed nicely in a well thought out styrofoam box insert.  Read Less

I would have preferred a 1 hp or approximately 750 watts air cooled spindle with a higher rpm for a competitive price, but this...  Read More

I would have preferred a 1 hp or approximately 750 watts air cooled spindle with a higher rpm for a competitive price, but this one seems to be a good entry unit.  Read Less

We run other bigger machines as well.

We run other bigger machines as well.  Read Less