Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found
Pros & Cons
Pros
Creality sonic pad is a fantastic addition to your printer(s) there are four usb ports on the sonic pad, and one is used for the connection to the printer. Comes with everything you need to get it going including cables and a usb drive. Usb drive incl... Read More
The sonic pad has a 64-bit processor. It is common to install klipper on a raspberry pi 4.
Cons
Calibrating the extrusion is backwards when adjusting and takes time too. It sill needs external power for the heaters and motors so the main power to the printer needs to be turned on. The 2 are incapable and fight each other.
Highlights
Quality
After hooking this device up to my ender printer, the printer was able to cut down on print times by a good bit with the improved software.
1mm i ran a quick test print which was 100x better than anything i could produce with the stock firmware.
These are visible marks that lower the quality of a printed model.
One thing i haven't seen mentioned anywhere yet, don't start a print with the same name on more than one printer.
Price
Overall its a really cool item and i'm glad that i got my hands on it - the price is reasonable, however, i don't recommend thi... Read More
Packaging/appearance
Pb2after having setup and configured klipper myself, i really like this out of the box experience.
Competitiveness
Overall: if you have a creality printer and want to run klipper then this is a great choice.
If you have a creality printer that this is compatible with then it allows you to start using klipper firmware pretty easily wi... Read More
It does give you alot of the benefits of klipper but if you want to use it with a printer other than a creality printer then it... Read More
The sonic pad has a 64-bit processor.
Overview
- How are reviewers describing this item?
sonic, good, able, quality and most. - Our engine has detected that Amazon has altered, modified or removed reviews from this listing. We approximate total reviews altered up to 10.
- Previous analysis of this listing was an F grade.
- Our engine has profiled the reviewer patterns and has determined that there is high deception involved.
- Our engine has analyzed and discovered that 29.2% of the reviews are reliable.
- This product had a total of 32 reviews as of our last analysis date on Aug 23 2023.
Helpful InsightsBETA
Posted by a reviewer on Amazon
No more sd card and card readers
Posted by a reviewer on Amazon
Although i did double my speed using all stock ender 3 s1 hardware
Posted by a reviewer on Amazon
I spent hours messing with octoprint on a raspberry pi and it still didn’t work as well as klipper
Posted by a reviewer on Amazon
The media could not be loaded
Posted by a reviewer on Amazon
I was excited when this first came out but stayed away for a bit to allow them to work out some bugs
Posted by a reviewer on Amazon
With the sonic pad it was done in about 17
Posted by a reviewer on Amazon
Thats without really tweaking any settings
Review Count History
Price History
Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found