Pros & Cons
pros
See Details
pros
See Details
User-Friendly Interface
Customers have had an easy experience installing and using this flowmeter with its user-friendly interface. They find the instructions clear and the unit functions as described.
Accurate Flow Measurement
Customers have generally positive feedback regarding the accurate flow measurement of this water flow rate volume digital display controller. They use it for various applications such as measuring feed water side of RO/DI systems, monitoring flow rate through UV sterilizers, and tracking water usage in filter systems. However, some customers mentioned the backlit display goes dark after 15 seconds and the calibration process can be time-consuming when handling other equipment.
Highlights
Quality
Physically and electronically, installation was straightforward and easy.
To make it easier to determine membrane & pre/post filtration stages effective remaining life.
I've spent the past few months refining my assembly of a whole house well water filtration system & reverse osmosis drinking wa... Read More
The sterilizer i have requires a flow at 37 gph optimum and 60 gph max to be effective eradicating protozoa.
Price
In my case a k value of 150 was close enough.
The default was a k-factor value of 1.
Competitiveness
So other than some better documentation, i'd highly recommend it.
Overview
- How are reviewers describing this item?
set, enough and accurate. - Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
- Our engine has discovered that over 90% high quality reviews are present.
- This product had a total of 53 reviews as of our last analysis date on Aug 16 2024.
Helpful InsightsBETA
Posted by a reviewer on Amazon
Will but same again if needed
Posted by a reviewer on Amazon
Reminder to always switch to stop before changingresetting options
Posted by a reviewer on Amazon
Wish it had more than one input channel
Posted by a reviewer on Amazon
There are no standard fitting at hardware store for this
Posted by a reviewer on Amazon
I took a pvc end cap and tapped thread into it wrapped the temp sensor with thread tape and screwed it in on top of an inline tfitting
Posted by a reviewer on Amazon
The sterilizer i have requires a flow at 37 gph optimum and 60 gph max to be effective eradicating protozoa
Posted by a reviewer on Amazon
Out of the box the pairing of the meter and sensor was way off reporting 16 gph while a had a gate valve nearly closed
Posted by a reviewer on Amazon
The default was a kfactor value of 1