Pros & Cons
Cons
The unit does not get cold enough to keep beer at 36f to 38f to avoid co2 breakout. Even when the temperature is set to 32f the liquid temp in the unit is above 40f which resuming foam and flat beer. The plastic top is flimsy and the mount points for ... Read More
Highlights
Quality
First, quality product, keeps the beer nice and cool and has all the correct holes and everything you could possibly need (with... Read More
I use a refrigerator with the tap mounted in the door for my bar area.
I also decided to go big with the tower and bought an old paulaner's ceramic tower.
Instead, you can use epoxy to affix the tension latches and it will work fine and it will seal with the magnet stripping.
Packaging/appearance
They fit very well inside the kegerator.
There kegs are larger around the center of the keg.
Competitiveness
This unit replaced a kegco brand kegerator.
Makes a great kegerator that is exactly what i wanted.
The edgestar does not pop like a gun going off the way the kegco unit did.
Overview
- How are reviewers describing this item?
great, plastic, mounted and cold. - Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
- Our engine has discovered that over 80% high quality reviews are present.
- This product had a total of 57 reviews as of our last analysis date on Mar 27 2023.
Helpful InsightsBETA
Posted by a reviewer on Amazon
Allot of the kegerators temp control will not adjust much below 39 degrees
Posted by a reviewer on Amazon
I drink coors which is millcoors
Posted by a reviewer on Amazon
There kegs are larger around the center of the keg
Posted by a reviewer on Amazon
One important note it will only hold three 5 gal kegs with difficulty if they are sanke i am sure it holds 5 gal corny kegs easily
Posted by a reviewer on Amazon
It will hold 3 sanke 5gals if you place them just right and tape the door closed
Posted by a reviewer on Amazon
Due to this i decided to replace the duct tape with tension latches which i thought i would screw into the outside wall of the fridge
Posted by a reviewer on Amazon
This is a mistake it will puncture the freon plate and leak oil and be completely ruined this was a 450 mistake
Posted by a reviewer on Amazon
Instead you can use epoxy to affix the tension latches and it will work fine and it will seal with the magnet stripping