Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found
Pros & Cons
Pros
The product delivers. It's simple to use, and it saves you a lot of frustration. See pics below.
It usually takes two or three cold pulls before i stop seeing remnants of my previous filament. I then do some wide temp cleaning by starting an extrusion of 50mm and set the hotend temp to 180. This makes cold pulls easy. Works great in my prusa i3 m... Read More
Cons
The long axis on the coil i received is right around 2. Worthless without a flex conversion. It always jams, and coils up inside the barrel.
Highlights
Quality
Once cleaner filament emerges from nozzle in clear, smooth line with no particles from recent filament, it should be finished.
I bought this stuff just to see if it would save me some time and aggravation and it truly has been one of the best purchases i... Read More
All of this together can lead to a clogged extruder if maintained poorly, so i purchased this dedicated cleaning filament from ... Read More
I tried using micro drill bits to clean out my hot nozzles, they always just snapped off and ruined the nozzle.
Price
Wish there was alittle more product for the money.
For those concerned about the quantity for the price, i purchased a single bundle two and a half years ago and am only about ha... Read More
Shipping
Shortly after posting a very negative review, because the filament i received was much too thick to fit through my ptfe feed sy... Read More
Packaging/appearance
It came in a vacuum sealed bag with desiccant, a product manual, and lite instructions.
Like i think somebody else said, esun threw in a sample of black petg which can be a nightmarish filament to "dial-in" well but... Read More
Competitiveness
Have used it once so far going from tpu back to pla and it worked well.
As an example, say i am printing petg at 245c and want to swap to pla at 200c.
Overview
- How are reviewers describing this item?
through, cold, clean and material. - Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
- Our engine has detected that Amazon has altered, modified or removed reviews from this listing. We approximate total reviews altered up to 5.
- Our engine has discovered that over 80% high quality reviews are present.
- This product had a total of 566 reviews as of our last analysis date on Apr 10 2024.
Helpful InsightsBETA
Posted by a reviewer on Amazon
Avoid having to tear down for a clog
Posted by a reviewer on Amazon
I used it after every filament change and especially ones where i the filament must print at a temperature way different then the one before it
Posted by a reviewer on Amazon
If there is residue of the previous filament running at unsupported temperatures that is where you can pick up some clogs
Posted by a reviewer on Amazon
As an example say i am printing petg at 245c and want to swap to pla at 200c
Posted by a reviewer on Amazon
I will raise my z axis to about 100mm off the bed so i can see how the filament is coming out of the nozzle and heat up the hotend to 245c
Posted by a reviewer on Amazon
I would then extrude 10mm at a time until it looks like the petg is purged and the extrusion comes out clear
Posted by a reviewer on Amazon
I then do some wide temp cleaning by starting an extrusion of 50mm and set the hotend temp to 180
Posted by a reviewer on Amazon
While the hotend is cooling the cleaning filament is still flowing through the hotend
Review Count History
Price History
Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found