Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found
Pros & Cons
Pros
This is mandatory if you are changing between a low-temp filament like pla to a high- temp filament which would carbonize pla remnants. It works phenomenally at priming the extruder for the new color without leaving any of the previous behind in the n... Read More
Highlights
Quality
The extruder tip gets filled with a nice melted plug of this material which you can quickly pull back out along with the existing material.
I use an ultimaker s5 and select the pla option still for use with this product.
I did not try cleaning this 3rd nozzle with the cleaning filament.
Packaging/appearance
I have a bowden setup on my printer so i just disconnect the teflon tube at the hotend and feed this directly into the hotend.
I tried using this filament to clear out the hips from the hotend and i ran into some problems.
I trim off the end and re-insert it into the hotend.
Competitiveness
I've used this cleaning filament in my lulzbot taz 5.
I've used this esun cleaning filament many times (although the 1.
I use a lulzbot mini and do a through and cold pull tequnique.
Overview
- How are reviewers describing this item?
material, cold, tried, still and new. - Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
- Our engine has discovered that over 90% high quality reviews are present.
- This product had a total of 34 reviews as of our last analysis date on Dec 5 2023.
Helpful InsightsBETA
Posted by a reviewer on Amazon
First off if you are planning of feeding this filament thru your extruder it may be problematic
Posted by a reviewer on Amazon
The diameter of this filament is highly variable and is undersized
Posted by a reviewer on Amazon
In a 15 in length i get diameters varying from 2
Posted by a reviewer on Amazon
Also this has a waxy feel too it so that may also lead to feed issues from the extruder
Posted by a reviewer on Amazon
I just manually push the filament in to extrude out the existing material until i start to see the cleaning filament come out
Posted by a reviewer on Amazon
This purges the bulk of the material
Posted by a reviewer on Amazon
I then quickly remove it from the hotend and there will be a be a nice glob of the old material stuck to it
Posted by a reviewer on Amazon
I trim off the end and reinsert it into the hotend
Review Count History
Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found