Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found
Pros & Cons
Pros
The finish is amazing and smooth. The filament still oozes pretty noticeably, but any issues caused seem to easily clean up post print. Hardened steel nozzle is a must, i recommend the nozzle x. Prints easily without much warping on a glass print bed ... Read More
Purchased after having problems with overture's easy nylon. It's also a very cheap upgrade.
Cons
Be very careful trying to trim brims. Insane amount of oozing from esun epa6-cf. It seems like there are a few "chunks" of carbon that are too large and get stuck in the nozzle.
Highlights
Quality
Best filament i have ever used that needed to be very heat resistant, strong prints.
Performs great in the prusa mk3s using glue stick on default smooth or textured sheet.
Neither were true - nylon requires extensive drying and i was only getting half the spool dry enough due to the configuration o... Read More
I dont even bother printing with this if i haven't dried the filament in a proper food dehydrator for 12+ hours.
Shipping
Amazon did send the wrong box of filament over a couple times.
I received a product in a timely manner.
Packaging/appearance
Product arrived well sealed, and being a first time user of esun filament, i just spooled it up into the machine and the esun drying box.
It can also come moist from the package.
Competitiveness
I've run through an about 7 rolls of this filament over the past year and compared to other filaments i've used, this is one of... Read More
Overview
- How are reviewers describing this item?
first, strong, good and material. - Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
- Our engine has discovered that over 90% high quality reviews are present.
- This product had a total of 123 reviews as of our last analysis date on Jul 18 2024.
Helpful InsightsBETA
Posted by a reviewer on Amazon
Also would recommend to have a really hot bed 8090 and for really big prints glue as well
Posted by a reviewer on Amazon
Otherwise your prints will come off
Posted by a reviewer on Amazon
I would also highly suggest a enclosure to print although not necessary
Posted by a reviewer on Amazon
This filament will absorb moisture and it will ruin the print
Posted by a reviewer on Amazon
It can also come moist from the package
Posted by a reviewer on Amazon
I run it at 55c 6 hours before printing and during the whole print
Posted by a reviewer on Amazon
Most under 600 printers are not well equipped from factory with a hotend that can run continuously at 260c without damage because of the ptfe tube that’s teflon
Review Count History
Price History
Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found