What does this mean?Pros & Cons
Pros
Stronger than normal pla and produces a nice finish. This has just been outstanding.
Esun pla + works best on my ender 3v2 with the hot end set to 210c and a bed temp of between 65c & 70c. The plus is more temperature dependant than ordinary pla i have found. Very good extrusion at 215 degrees with a 65 degree print bed.
Cons
With tangled rolls of filament, prints are extremely unreliable. This is the worst filament i have ever bought for snagging and failed prints.
Very bad bed adhesion, requires much higher bed temps than 'normal' pla. First of all, firstly, there was very little bedadhesion.
Highlights
Quality
The quality is good and there is no bubbles so love them.
I've been through a couple of rolls of the white now, print quality is great, no clogs, no tangles, definitely recommended.
I found with the esun pla+ that the sweet spot was always the same, 210 degrees for the nozzle and 55 - 60 degrees for the bed.
Some people mention poor adhesion or visible layer lines, these issues are not with the filament but with their printers.
Competitiveness
Esun makes a absolutely best filament, this little vacuum bag set is perfect, all esun products are of hight quality 10/10 from me
Overview
- How are reviewers describing this item?
good, quality, first, great and nice. - Our engine has profiled the reviewer patterns and has determined that there may be deception involved.
- Our engine has determined that the review content quality is low.
- Our engine has analyzed and discovered that 73.7% of the reviews are reliable.
- This product had a total of 6,897 reviews as of our last analysis date on Sep 30 2022.
Helpful InsightsBETA
Posted by a reviewer on Amazon
I print at 215 deg on 50 deg to success
Posted by a reviewer on Amazon
Dont print any lower i dont feel
Posted by a reviewer on Amazon
It’s more of a neon pink once printed
Posted by a reviewer on Amazon
New to the hobby so tried a pla to give the prints some strength
Posted by a reviewer on Amazon
This is my normal filament so i have printed rolls and rolls of grey but i notice that recently some rolls are stringing very badly and i store all of them identically in heated filament boxes
Posted by a reviewer on Amazon
It seems pot luck whether you get a good roll or a bad roll
Posted by a reviewer on Amazon
As i found that different batches of the same brand required different heat setting
Posted by a reviewer on Amazon
I found with the esun pla that the sweet spot was always the same 210 degrees for the nozzle and 55 60 degrees for the bed
Review Count History
Price History
Add Fakespot to your browser, Secure Shopping on the go.
Download Fakespot for Browsers
