Pros & Cons
Pros
Bed 85 deg. Bed adhesion at 80 degrees is absolutely excellent. Got the occasional stringing / angel hair, but nothing serious and easily cleaned up. Cht nozzle flows controllably, and produces good quality prints.
The colour is very vibrant, material great quality, had never struggled with it. Has a great finish lots of shine.
The best filament i have ever used on my three 3d printers, prusa i3, creality cr6-se and a cr10s. Prints well and has not too much stringing. I love the way this looks, and it preserved the details very nicely.
Cons
Even after drying it for hours it only prints properly for a few metres of filament before it start popping again and the print fails. White is awfull, frequent jamming, poor layer adhesion. The winding of the spool is horrendous - the worst i have ev... Read More
Highlights
Quality
Petg is still a pain to print with but this is a good quality petg and looks nice when printed.
Now that i've worked out the problem, i'm happy with the filament.
Marked down one star as although mine came vacuum packed with desiccant, it would be nice to have a resealable bag included wit... Read More
Price
Price was competitive, printz are hassle free
Competitiveness
It needs just some temperature adjustments compared with other petg brands but it works fine after tuning it.
Printed well straight away with no spitting (the usual amount of petg stringing).
In cura, there is a esun petg profile you can use, but i had to change the settings because i had quite a lot of issues with re... Read More
This seems to be a common thing with esun filament, every spool i have and have opened has been badly wound.
Overview
- How are reviewers describing this item?
good, first, quality and great. - Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
- Our engine has discovered that over 90% high quality reviews are present.
- This product had a total of 1,869 reviews as of our last analysis date on Mar 8 2023.
Helpful InsightsBETA
Posted by a reviewer on Amazon
Filament appears to be really dry layer adhesion is great at 230 deg c hemera and no stringing was evident at all
Posted by a reviewer on Amazon
It was a struggle to get this to adhere initially but that was my own inexperience with petg
Posted by a reviewer on Amazon
Printing to low of a nozzle temp was resulting in the material not sticking and when i did a temp tower it even caused a clog
Posted by a reviewer on Amazon
Struggled to get good print from it dried the filament changed nozzles and made no difference
Posted by a reviewer on Amazon
Finally measured it and it came out at 1
Posted by a reviewer on Amazon
The media could not be loaded
Posted by a reviewer on Amazon
My print settings on ender 3 v2 nozzle 240c bed 80c cooling fan off or low value if i have overhangs bridging use tape on the bed as petg can adhere too well fuse into the glass bed i havezero problems with warping adhesion or lifting corners
Posted by a reviewer on Amazon
I took some time to find the correct combination of temperature