Pros & Cons
Pros
Surface finish is quite glossy due to the smooth surface. Bed adhesion is off the charts, did not have to use glue stick or adhesion spray. Enable combing and use hairspray to stick it to bed.
First print with the black pla+ had me shocked at how good the layer adhesion was compared to regular pla. I print at 215°c/60°c (the manufacturer recommends 65°c bed temperature) and have had no problems whatsoever, especially with bridging and the l... Read More
Cons
Pla+ is much less brittle, has a better finish & glows for longer. Not brittle, more white in colour and glows green when charged up with a light source. Can't recommend this abs, no issues with trident.
Even with 100% infill the glow doesn't last more than a minute. After about 6 hours of printing of a 12 hour print, the filament got stuck and wouldn't come off the reel. Even with 1mm nozzles it just clogs constantly!
Highlights
Quality
The print quality is on par with every other filament i have used, in reality its layer adhesion was one of the better ones i have tried.
Prints really well, happy with the product.
Here are the settings i used:-sliced with prusaslicer0.
Price
I can't convey every aspect of this filament in words, so all i can really say is that if pla+ sounds good and the price is dow... Read More
Good delivery speed , good price, i recommend this seller and this filament.
Packaging/appearance
Was able to print onto the creality glass bed with a thin layer of pva.
Competitiveness
I have tried a few petg filaments on my prusa i3mk3s+ - starting with more expensive brands.
Have had absolutely no problems on my anycubic x.
This seems to be a common thing with esun filament, every spool i have and have opened has been badly wound.
Seems this may need a uv light to get it to glowtried a 3cm part and did not glowmaybe with a larger part and intense light mig... Read More
Overview
- How are reviewers describing this item?
good, dark, great, colour and nice. - Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
- Our engine has discovered that over 90% high quality reviews are present.
- This product had a total of 919 reviews as of our last analysis date on Oct 19 2022.
Helpful InsightsBETA
Posted by a reviewer on Amazon
Ender 3 v2 initial temp 240° then 235° bed 80° speed 65 cooling 50
Posted by a reviewer on Amazon
Wore out 2 nozzles brass pretty quickly but i expected this
Posted by a reviewer on Amazon
Seems this may need a uv light to get it to glowtried a 3cm part and did not glowmaybe with a larger part and intense light might do good idea though shame
Posted by a reviewer on Amazon
Under normal lights very little glow maybe if used black lights be good
Posted by a reviewer on Amazon
Be aware that layer lines will cause diffraction of light leading to the printed product being translucent and not transparent when printed
Posted by a reviewer on Amazon
This can be improved with sanding the product and the best results are with prints with little infill and few walls e
Posted by a reviewer on Amazon
I decided to try the esun white 1
Posted by a reviewer on Amazon
Test printer creality ender 3 proi received the following black luminous green glow in the dark fire engine red gorgeous pigment and white natural