Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found
Pros & Cons
Pros
Works well. The * is a nice bonus.
Set mine up basically inline in the pcv system. Bought this for my new kia k5.
The quality of construction is shockingly good for the cost. All screws and threads met perfectly. I was blown away by the quality of the actual can.
There are 4 ends that need to be connected and clamped. The l bracket it comes with is sort of handy, but you have to have the perfect spot. Had to customize the bracket and get a longer hose for the out side.
Cons
Even using 2 strap wrenches was not enough to separate the can from the mount. Catch can has oily prints and light grease all over it (probably from greasy hands from whoever opened it) put a disclaimer for mounting bracket/scrap metal, that there is ... Read More
Two 5/8” * were included, but no hose. Still would not hold vacuum. Not even close to enough.
Highlights
Quality
Good product, perfect size, easy to install, works great with different size hoses.
Supplied mounting bracket worked great, use black atv silicone to seal hose fitting threads and vc breather apparatus.
The last photo shows what it caught the first week after installation.
Installed it on 2018 kia soul, see picture how much oil caught in a month
Price
Best bang for your buck catch can.
5-1/2” barb fittings separately for an additional $20.
So for $34 if it ain’t worthed then no lost.
Cannot justify spending $150-$200 when this works great.
Shipping
The first i ordered the hardware kit was missing and amazon shipped another instantly!
Packaging/appearance
I added the stickers and carbon fiber decal to it)
Competitiveness
We’ve been using evil energy products for the last few years and find to be just as good as the high dollar competition.
Compare it to other canisters out there and you’ll find it works just as well at a great price.
Overview
- How are reviewers describing this item?
good, great, easy, fit and quality. - Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
- Our engine has detected that Amazon has altered, modified or removed reviews from this listing. We approximate total reviews altered up to 2427.
- Our engine has discovered that over 80% high quality reviews are present.
- This product had a total of 2,615 reviews as of our last analysis date on Oct 10 2024.
Helpful InsightsBETA
Posted by a reviewer on Amazon
Be prepared to make your own bracket and buy extra fuel line to splice in
Posted by a reviewer on Amazon
I don’t normally write reviews but if you showed me the product before i bought it i would have guessed it was 100
Posted by a reviewer on Amazon
Aluminum mounting piece is easy to bend or twist however you need it mine is only held on with one bolt and a 90 degree bend holds the bottom so it can’t rotate
Posted by a reviewer on Amazon
I wanted to run 90 degree hose fittings so the fuel lines wouldn’t be bent at such a sharp angle but unfortunately the thread and size doesn’t leave you with that option not a big deal though
Posted by a reviewer on Amazon
Also had to get a few more feet of fuel line but for 35 bucks i was surprised it came with any at all
Posted by a reviewer on Amazon
It came with the stainless steel scrubberfilter material i mounted with the included bracket that i twisted 90 enough hose to connect it but i had to add 2 hose clamps
Posted by a reviewer on Amazon
This should help reduce oil vapors going into the intake manifold and leaving deposits on the back side of the intake valves
Posted by a reviewer on Amazon
Good product just didnt fit my car
Review Count History
Price History
Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found