Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found
Pros & Cons
Pros
The roll is perfectly spooled with zero crossovers. These are interesting sized spools -- and cardboard.
Jayo is one of the few brands i have not experienced dry rotting. I use an elegoo neptune 3 to make my prints, and the factory recommendations are a bit too high for my liking. Rumor is the newer stuff isn't quite as nice as the batch i have.
Cons
No support or offers to help or to replace the bad reel of filament. It also means that i can not use my dry box set up because the reels get hung up on the bends on the rollers. Will be requesting a refund.
It's very hard to get it to stick and start a print on a chiron. At the end of print, be prepared to forcefully tug the remaining filament out of the nozzle.
I tried cranking the temps, it shows 205-215. The melt point seems to be an all or nothing, even at 230c. It's also very temperamental with temperature. Had set temp to 240 deg.
Highlights
Quality
It’s my favorite pla , good printing quality
Bridges well, decently strong and at high speed printing develops a nice matte finish
It failed almost every first print then once more glue was applied it stuck to the build plate.
I tossed this filament 2 months ago at a storage after having constant underextrusions, clogs, stringing, moisture issues.
Price
To me, this product was great for its price, and for printing.
I continue to buy this filament for the price.
This stuff was one of the cheapest at the time of purchase.
I bought this filament because it was cheap.
Shipping
My first order i only received 1 spool out of the 8 guess shipping ignored the keep as a set sticker.
Packaging/appearance
Nicely packed in a box and resealable bag.
Competitiveness
I very much suggest investing in a filament dryer because it can help solve majority of your issues with cheaper filament brands.
I printed several bolts with this and with other brands and this was the worst.
The pla+ is somewhat stronger than traditional pla.
In comparison to before it is a huge difference.
Overview
- How are reviewers describing this item?
good, great, same, color and tried. - Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
- Our engine has discovered that over 90% high quality reviews are present.
- This product had a total of 3,667 reviews as of our last analysis date on Jun 3 2024.
Helpful InsightsBETA
Posted by a reviewer on Amazon
Ive been purchasing 200g multiroll filament bundles from a variety of other companies for a little bit
Posted by a reviewer on Amazon
I have to say from the first roll i opened and through the other 9 rolls i have not experienced any problems with any of them
Posted by a reviewer on Amazon
The pla is somewhat stronger than traditional pla
Posted by a reviewer on Amazon
The hole in the cardboard is really small and i always feel like i’m going to break my machine trying to pull it back off
Posted by a reviewer on Amazon
I won’t be able to buy it since i wanted cheap multi color pla for the mini
Posted by a reviewer on Amazon
Firstly the red filament is a very light red and unlike the product picture
Posted by a reviewer on Amazon
Additionally the filament itself failed the bend test
Posted by a reviewer on Amazon
Grabbing the end of the filament and bending back into itself shouldnt break if dried dried the filament for 6 hours before performing test
Review Count History
Price History
Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found