What does this mean?Pros & Cons
Pros
The temperature tower shows heavy stringing from 220c down to about 205c. Adhesion is great on a glass bed using a glue stick. ender 3 v2 neo* nozzle 195c* bed 60c.
The wind they place on their reels is consistent and through about 15 1kg rolls of this filament has been true to their advertisement as being tangle and snag free. It is sheer enough that you could probably see through thinner prints, but i printed a... Read More
White filament is great if you intend to paint or sculpt over your 3d prints. Not truly opaque and also has a slight yellow tint to it, but does seem to have more flex and give than standard pla.
The filament comes on a recyclable cardboard spool. Cardboard is hygroscopic, absorbing humidity from the air. It comes in a vacuum sealed bag with a silica gel packet.
Cons
It is apparently quite brittle at spots. It was overlapped, bent, kinked, and everything but tied in a knot.
The quality of the plastic makes the brings come out thin or clogs the printer. Extruder temps higher than 200c seems to cause print to look cloudy with a poor finish (not clear) wasted 40 hours trying to print thors hammer for halloween costume. The ... Read More
Highlights
Quality
This filament has produced great results on my printer that has been dialed in, for curiosity i tried it on a newer printer tha... Read More
I did not even have to change my settings so i am happy to recommend this product.
I've seen other 3-d filament in this price range and the quality was not as good as jayo.
The quality of filament can affect your prints no matter how well dialed in it is.
Price
First, the price is about in the ballpark of other budget brands going by weight alone.
Possibly would buy again if the price was good.
Competitiveness
Printed a few models just fine after getting it dialed in.
65kg you are looking at roughly 16$/kg - on par with most mid-range 1kg spools.
Jayo which is a subsidiary of sunlu has several varieties of pla.
Overview
- How are reviewers describing this item?
good, great, first, little and cardboard. - Our engine has profiled the reviewer patterns and has determined that there is high deception involved.
- Our engine has analyzed and discovered that 31.2% of the reviews are reliable.
- This product had a total of 1,650 reviews as of our last analysis date on Jan 26 2023.
Helpful InsightsBETA
Posted by a reviewer on Amazon
For the black i used a 210deg temp on a neptune 2s no real stringing or other issues to write home about
Posted by a reviewer on Amazon
I can see the structure inside but not all the way through it because its so thick
Posted by a reviewer on Amazon
However i have not yet ran across a brand that uses the cardboard spool and im not sure how i feel about it
Posted by a reviewer on Amazon
I guess it may just be more of an aesthetic thing but i prefer some of the other brands spools which also usually include measurements to estimate how much filament is left for your remaining prints
Posted by a reviewer on Amazon
It is similar to petg feel but prints like pla
Posted by a reviewer on Amazon
Able to print at 60mm speeds with a 185c nozzle temp and 55c bed temp
Posted by a reviewer on Amazon
Very light layers lines even at
Review Count History
Price History
Add Fakespot to your browser, Secure Shopping on the go.
Download Fakespot for Browsers
