TOP PRODUCT
What does this mean?
More top products to consider
Transparency is key. This page may contain affiliate links. Find out how we make money.
Ask Fakespot Chat questions about this productAlpha
Initializing Fakespot Chat
System error,
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found
Pros & Cons
Pros
Do not over tighten. If it leaks, tighten it just a tad more. Works great with abrasive filaments. The coating they apply makes waste filament buildup easy to remove.
No clogs so far. Plating doesn't oxidize so it doesn't mess with the ohmic height sensing. You need to wipe off any excess non-conductive material between prints.
Cons
It literally strips the material on the internal walls of this nozzle. Left the screw in the inside, with nothing on the outside to take it out. Overall, it is garbage material that is not worth buying.
Highlights
Quality
Extremely high quality nozzle, works fantastic on my hexagon hot end.
Tricky materials like proto-pasta htpla are currently printing beautifully.
I’ve heard this nozzle will last a long time even printing metal-infused, glow-in-the-dark or other abrasive materials.
I broke the first one i ordered while trying to remove it after a feed tube clog, instead of just soaking the extruder i wrench... Read More
Price
Given these are $15/each that’s a great value over the stock nozzle or more expensive hardened steel.
The price is reasonable, installation is easy so it's pretty much a no-brainer upgrade for your lulzbot.
Wish the price was a bit lower or at least offered with a qty discount.
I don't like the price of these, but the slight time savings and increased ease (at least in terms of visibility) has made it w... Read More
Shipping
The nozzle arrived very fast, it was easy to replace the old one on taz 5 with this one and the printing works great!
It seems like the later taz's have been shipping with a .
Packaging/appearance
I've had no jams, clogs or other nozzle related problems since and it still looks like it just came out of the box.
Overview
- How are reviewers describing this item?
great, hot, good, easy and stock. - Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
- Our engine has discovered that over 90% high quality reviews are present.
- This product had a total of 148 reviews as of our last analysis date on Jan 15 2024.
Helpful InsightsBETA
Posted by a reviewer on Amazon
I havent come across a situation where o needed to change any of my existing parameters
Posted by a reviewer on Amazon
Allow me to go a little more indepth on this review
Posted by a reviewer on Amazon
The one star review who supposedly ruined the hot end obviously cross threaded it from the get go which is a huge nono
Posted by a reviewer on Amazon
Even if the nozzle is over tightened the brass nozzle will not likely ruin the steel hot end when threaded appropriately
Posted by a reviewer on Amazon
The person may have also not been using a lulzbot hexagon hot end because its very difficult to ruin steel threading with brass threading
Posted by a reviewer on Amazon
The brass threading will almost always strip first
Posted by a reviewer on Amazon
When installing this be very careful
Posted by a reviewer on Amazon
Tighten slowly and by hand use some type of heat insulator like a hot pad with the hot end set to approximately 165 c
Review Count History
Price History
Ask Fakespot Chat questions about this productAlpha
Initializing Fakespot Chat
System error,
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found
Add Fakespot to your browser, Secure Shopping on the go.
Download Fakespot for Browsers
