Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found
Pros & Cons
Pros
Novamaker is top quality filament.
Works best at lower ambient temperatures. Runs best at 213 c with 80 c bed temp.
Novamakers 3d printer cleaning filament 1. This stuff seems to scrub the old filament out much quicker. Here's what i repeat steps 1-4.
Cons
Spool recommends a hotend temp of 220-260c - if you go over 240c it strings badly. Not a single success in seven attempts. Seems there was an issue in manufacturing and nobody noticed this reel goes from 1 to 2.
Pieces on high temperature degrade the black petg color into a dark purple and lots of micro-bubbles form on the material. I dislike the oily beige brown discolored black tpu 95a filament.
Even after drying it for almost 2 days in my filament dryer, it still bubbles at the hotend and destroys the print. Constantly jams in extruder, even at very low feed rates. Crackling bubbling sound that it makes when printing is just a big no no.
Highlights
Quality
In terms of printing parameters, the recommended temperatures (230°c - 250°c for the nozzle and 70°c - 80°c for the bed) worked... Read More
Good quality filament both for thickness and durability.
Once it reaches about 180c, start pushing down on the filament to squish it into the hotend to capture anything left in there.
The filament arrives dried for 24 hours before being vacuum-sealed with desiccants in a nylon bag to prevent moisture absorption.
Price
It seemed like a good price and was a good quality product.
I would recommend this petg, the transparent green version at least, to anyone looking for easy to print and inexpensive petg.
Packaging/appearance
Thanks for responding to the packaging issue.
I appreciate the attention to detail in the packaging as well.
Competitiveness
My clog was gone after this and it seems to do a better job than when i've used pla or petg in the past.
The price is lower than some of the more mainstream brands, yet the print quality i've gotten from the petg is beyond them.
The novamaker worked with bambu's (arguably too aggressive) stock profile without any additional tuning.
This will be my go to brand for tpu.
Overview
- How are reviewers describing this item?
good, first, color, quality and great. - Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
- Our engine has discovered that over 80% high quality reviews are present.
- This product had a total of 2,052 reviews as of our last analysis date on Jul 13 2024.
Helpful InsightsBETA
Posted by a reviewer on Amazon
While browsing filament one day i saw one that came with some cleaning filament as well
Posted by a reviewer on Amazon
Id never heard of cleaning filament before
Posted by a reviewer on Amazon
The first time i used it i had quite a few specs of junk that were removed
Posted by a reviewer on Amazon
Now with regular use the cleaning filament quickly comes out clear leaving the nozzle ready for its next assignment
Posted by a reviewer on Amazon
The filament arrives dried for 24 hours before being vacuumsealed with desiccants in a nylon bag to prevent moisture absorption
Posted by a reviewer on Amazon
Good for beginners starting out in 3d printing
Posted by a reviewer on Amazon
Adhered excellent to pei build plate with no additional adhesion measures adhered better than pla or petg but came off with little effort
Posted by a reviewer on Amazon
This will be my go to brand for tpu
Review Count History
Price History
Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found