Pros & Cons
Pros
Fan off for everything but bridges/overhangs. Works well on my ender 3 v2 with bowden setup. Seems to scrub the old filament out much quicker.
Higher on the recommended temps for bed heating and nozzle worked better. Printed with 50mm/s and 3mm retraction, 230 on hot end, 60 on bed. Gaskets for glue bottles are printed at 100% infill to replace degrading foam gaskets.
Cons
I'm not the type to just bash a product, but i feel i should warn people about this one. It wastes time, wastes money. No blockage. Even though i am 6 months beyond the return window, they let me send it back for a refund!
bad, pulls off bed after a few layers and sticks to nozzle and creates a blob around it. Parts look good but they are extremely brittle. Only thing it sticks to reliably is the printer's hotend and brass nozzle. More brittle than the same part printed... Read More
The translucent blue is extremely difficult to print, i have to go dead slow (less than 30mm/s) to have any success of a print. I’ve printed with this filament for about 8 hours, half of which i hear popping noises like a rice crispy commercial even a... Read More
Filament is sloppily rolled onto the reel.
Highlights
Quality
I have to say that i'm pleasantly pleased with the overall quality and strength of this product.
All over very impressed with the filament.
2mm standard quality settings and generic tpu.
Prints wel, but adhesion is a bit off, otherwise an amazing product!
Price
The price is the best for the amount provided.
Packaging/appearance
After 100 hours or so of printing, somehow one side of the hot-end was feeding well and the other was either blocked or produci... Read More
I put this spool strait from the packaging to the printer without letting go of the end.
Switching from black petg to clear petg used to cost me a bunch of the clear petg to get all the black out of the hotend.
Competitiveness
I have a dual-extruder hot-end which i mostly use for printing pla.
This was my first time trying petg filament and it worked great.
It takes less than 50mm no matter the color.
Bump your hotend temp 5-10 degrees hotter than the last filament you used and pump this stuff through till it's clear.
Overview
- How are reviewers describing this item?
good, great, color, first and quality. - Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
- Our engine has discovered that over 80% high quality reviews are present.
- This product had a total of 1,674 reviews as of our last analysis date on Sep 20 2022.
Helpful InsightsBETA
Posted by a reviewer on Amazon
This was the second time i have used tpu it is trickly to print with this material
Posted by a reviewer on Amazon
After 100 hours or so of printing somehow one side of the hotend was feeding well and the other was either blocked or producing patchy prints
Posted by a reviewer on Amazon
I handfed just a few inches of novamaker cleaning filament through at 230c until it ran 100 clear then let the hotend slowly cool to 60c then pulled the filament back out a cold pull
Posted by a reviewer on Amazon
But its not really daytoday usage stuff so i guess im ok with it being in a bag instead
Posted by a reviewer on Amazon
This is the first time ive bought from this brand and the material was good but it had a major issueprosquality and texture was great
Posted by a reviewer on Amazon
But it still had a tangle which caused a 12 hour print to fail
Posted by a reviewer on Amazon
This will not clear a clog this is not designed for cold pulling
Posted by a reviewer on Amazon
It may help because it does lubricate the hotend so be careful what you touch after handling because your handsfinger may