Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found
Pros & Cons
Pros
Tpu is not squishy and is very strong and flexible. Great for grommets, wall outlet cable plugs, floor pan plugs.
Great filament for my ender 3 v2. Printed with 50mm/s and 3mm retraction, 230 on hot end, 60 on bed. Gaskets for glue bottles are printed at 100% infill to replace degrading foam gaskets.
Make sure to keep dry and away from moisture. Higher on the recommended temps for bed heating and nozzle worked better. Used a 225c hotend and r. Printed on my cr-10 with 240 temp and 65 bed temp.
The color is this almost sparkly translucent florescent yellow. It almost seems like it glows.
I find myself using it all the time because i only need 10-15mm of material to clear the nozzle. If i have any complaint, i rather wish it came on a spool - just because that makes it easier to store with my other filament spools.
Highlights
Quality
I am very pleased with the product.
I am extremely pleased with the maker.
Print quality sucked at first but then i dried it in my dehydrator and it came out pretty good for the price.
Very minor stringing with the increased retraction distance.
Price
The price is the best for the amount provided.
Packaging/appearance
For petg, this filament prints extremely well and comes out of the packaging dry, unlike some other manufacturers.
I had to adjust my extruder to reduce the gap between the wheel&gear and the top of the heatbreak.
I put this spool strait from the packaging to the printer without letting go of the end.
I should probably raise the bed temp from 65c, but i'm currently using the creality magnetic build surface and it gets wonky/no... Read More
Competitiveness
It is by far the strongest petg out of all the brands i've used so far.
This is second color and spool of novamaker petg filament i have gotten.
Went blue tape 110c bed temp 227c extruder same makerbot settings.
Good properties for petg adhesion but really almost translucent and just phenomenal color.
Overview
- How are reviewers describing this item?
first, good, great, color and nice. - Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
- Our engine has discovered that over 80% high quality reviews are present.
- This product had a total of 1,795 reviews as of our last analysis date on Mar 5 2023.
Helpful InsightsBETA
Posted by a reviewer on Amazon
Higher on the recommended temps for bed heating and nozzle worked better
Posted by a reviewer on Amazon
Run this filament slow unless you have lots of experience running soft filaments
Posted by a reviewer on Amazon
It has a habits of escaping the extruder gears if fed to quickly
Posted by a reviewer on Amazon
Had best luck with standard brass nozzle polished interior
Posted by a reviewer on Amazon
Ran it at about 230 nozzle and 63 bed
Posted by a reviewer on Amazon
This material is the same stuff lots of shoes and other flexible things are made of
Posted by a reviewer on Amazon
Slow and it almost is clear clear
Posted by a reviewer on Amazon
This is the first time ive bought from this brand and the material was good but it had a major issueprosquality and texture was great
Review Count History
Price History
Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found