Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found
Pros & Cons
Pros
Drop-in replacement for the s1 pro or upgrade your ender 3/ender 3 v2/esper 3 pro/esmer 3 max. Nozzle heat-up is really fast. The only issue is there is not alot of info on how you need to modify ender 3 max neo. Will work great for you art work than ... Read More
Highlights
Quality
It is compatible with the bl touch and cr touch as well.
If you are thinking about upgrading the hot end, i will tell you it is a noticeable improvement in print quality.
I don't see that happening with the sprite pro because of the enclosed nature of it.
If you are doing your own firmware from merlin don't modify with the ender 3 max.
Price
Even with all the upgrades, the difference is well worth the price.
Packaging/appearance
My origninal issue with it was there is no flare on the top of the hotend where the filament enters into the hotend.
The issue i found i had was the ptfe tube had fallen out of the sprite exturder.
Just be careful not to put too much on or it gets glumpy and you have to wash the sheet.
Competitiveness
I also installed a creality dual z kit while i was in there.
I highly recommend the official creality sprite extruder pro upgrade kit!
I got the official creality sprite extruder pro upgrade kit for one of my ender 3 v2's.
Overview
- How are reviewers describing this item?
pro, neo, easy, great and hot. - Our engine has profiled the reviewer patterns and has determined that there is high deception involved.
- Our engine has analyzed and discovered that 15.0% of the reviews are reliable.
- This product had a total of 33 reviews as of our last analysis date on Aug 21 2023.
Helpful InsightsBETA
Posted by a reviewer on Amazon
The media could not be loaded
Posted by a reviewer on Amazon
The end of the ribbon is labeled with tags where each wire gets plugged into
Posted by a reviewer on Amazon
Ends of the wires have ferrule terminals crimped on instead of soldered wire strands
Posted by a reviewer on Amazon
No crbl touch device is included youll need to purchase that separate or remove from your existing hotend to swap over
Posted by a reviewer on Amazon
The x limit switch is not in the correct orientation to interface with the protrusion on the new mount bracket
Posted by a reviewer on Amazon
After that was printed i disassembled the printer
Posted by a reviewer on Amazon
The stock firmware isnt quite compatible with the changed location of the cr touch sensor so i installed the firmware recommended on the printables page for that switch end cap
Review Count History
Price History
Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found