Posted by a reviewer on Amazon

Im honestly kind of amazed with 8 a hairdryer some nail glue a pushpin and half an hour i did what the local tech store quoted me 160 to do

Posted by a reviewer on Amazon

I put the flat part of the pin onto the lens glass wiggled it a little and the glass came right off

Posted by a reviewer on Amazon

Used the tip of the pin to clean up the remaining adhesive and then opened up one of the two little baggies containing a glass lens and an adhesive ring

Posted by a reviewer on Amazon

I took off the plastic barrier from one side of the glass and one side of the adhesive and used tweezers to place the adhesive onto the glass then used the tweezers again to remove the barrier from the other side of the adhesive and put the glass adhesivesidedown onto the camera

Posted by a reviewer on Amazon

I used a cloth and gently pressed down on the lens to fix the adhesive and then removed the plastic from the other side of the glass

Posted by a reviewer on Amazon

Keep in mind the instructions dont mention that you have to also transfer the mic cover a black sticker from the original into this one so look out for that or you will have a gaping hole in your case

Posted by a reviewer on Amazon

Make sure to clean both sides of the glass in front of the camera as there is some residue left from the packaging that will fog your camera

Posted by a reviewer on Amazon

This is the second back glass that i have done on this phone