Posted by a reviewer on Amazon

As often happens the instructions seem to have lost something in translation from chinese

Posted by a reviewer on Amazon

The instructions keep referring to rivet nut lever which in fact is one of the screw threaded riveting rods of different sizes that screw into the business end of the tool and nothing to do with the operating levers

Posted by a reviewer on Amazon

The instructions for changing the riveting rods state 2 push the sleeve back but the arrow indicating this is points in the general direction of the outer fixed sleeve and the pictures are very small

Posted by a reviewer on Amazon

It is not obvious that the screw in fitting is retained by a sliding spring loaded grey coloured sleeve that has an internal hexagonal shape like a short box spanner

Posted by a reviewer on Amazon

When this is pushed back in the direction of the die cast body by inserting a finger nail into a wide slot machined in the outer fixed sleeve the insert tool can be easily unscrewed and a different size screwed back in

Posted by a reviewer on Amazon

Instruction 3 has an arrow confusingly pointing in the wrong direction

Posted by a reviewer on Amazon

The spring loaded sleeve is then released and the hexagonal part of one of the m5 m6 m8 etc inserts is covered up and prevented from unscrewing when the pump action draw bar is pulled in and out to screw the riveting rod into the rivet nut

Posted by a reviewer on Amazon

I hope this helps anyone who like myself may be scratching their head over the user manual descriptions