For the best finish feasible on a good piece, let the primer cure for at least a couple of days’ time, ideally warm and dry, an...  Read More

For the best finish feasible on a good piece, let the primer cure for at least a couple of days’ time, ideally warm and dry, and then wet-sand it (say, with 600-grit paper) to remove imperfections before spraying the topcoat, which is best warmed beforehand to flow out over the substrate.  Read Less

Those accustomed to lacquer spray primers ought to be aware that this one is comparatively thick and heavy, so can take much lo...  Read More

Those accustomed to lacquer spray primers ought to be aware that this one is comparatively thick and heavy, so can take much longer than the promised 15 minutes to dry to touch and must be applied with care to vertical surfaces, as it can run or drip.  Read Less

The spray is black by default and does not change color like vht rust converter.

The spray is black by default and does not change color like vht rust converter.  Read Less

And sprayed it with this for a bright primer before i sprayed it a 2 stage paint with flake.

And sprayed it with this for a bright primer before i sprayed it a 2 stage paint with flake.  Read Less

It has a good amount of spray especially for a low price

It has a good amount of spray especially for a low price  Read Less

Also, if your workpiece is rusty, rust-oleum’s rusty metal primer is a better bet for durability.

Also, if your workpiece is rusty, rust-oleum’s rusty metal primer is a better bet for durability.  Read Less