4.650106Fakespot Adjusted Rating
1 2 3 4 5

Highlights

The AI used to provide these results are constantly improving. These results might change.

Quality


This device was excellent for turning a low voltage dumb light switch into a homekit enabled endpoint.


Shelly devices including these rgbw controllers just simply work great and the way people want them to!


Setting input 1 to edge mode acts like a pure toggle -- physical switch goes between on/off regardless of position.


The video is at 240fps of an led strip dimmed to 1%.

Competitiveness


Most of the rest of iot devices need to learn from shelly.


The pwm frequency is much higher than the older shelly rgbw2.


Also, it would be nice if shelly added a two channel cct mode (two adjustable cct strips with two channels each) to the one cha...  Read More

Overview

  • How are reviewers describing this item?
    high, two, great, physical and enough.
  • Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
  • Our engine has discovered that over 90% high quality reviews are present.
  • This product had a total of 106 reviews as of our last analysis date on Jan 26 2025.

Helpful InsightsBETA

The AI used to provide these results are constantly improving. These results might change.

    Posted by a reviewer on Amazon

    See attached photo for setup with input 1 24v dc power via positive red and negative white output 3 24v led strips switch single pole levitonbrand doesnt matter smart controller shelly plus rgbw pmsetting the device profile to 34lights x434 and input 1 i1 to toggle the smart controls work as well as physical switch going 34on34


    Posted by a reviewer on Amazon

    Setting input 1 to edge mode acts like a pure toggle physical switch goes between onoff regardless of position


    Posted by a reviewer on Amazon

    Most of the rest of iot devices need to learn from shelly


    Posted by a reviewer on Amazon

    The stock firmware is surprisingly functional with the main missing feature for me being no support for 2xcct


    Posted by a reviewer on Amazon

    If youre crafty enough you can flash the module with esphome or tasmota but as of nov 2024 its very difficult to do ota so youll have to figure out a way to connect to the nonstandard programming pins on the bottom of the unit


    Posted by a reviewer on Amazon

    The pwm frequency is much higher than the older shelly rgbw2


    Posted by a reviewer on Amazon

    The video is at 240fps of an led strip dimmed to 1


    Posted by a reviewer on Amazon

    Unfortunately home assistant can’t control the new features e

Review Count History
Created with Highcharts 6.0.1Jan '2504080120160
Price History
Created with Highcharts 6.0.118:41:48010203040

Add Fakespot to your browser, Secure Shopping on the go.

Supported on Amazon, eBay, Walmart, Bestbuy, and many more.

Download Fakespot for Browsers
Download for the Chrome Web store
Download for Firefox Addons
1 million plus shoppers trust Fakespot