Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found
Pros & Cons
Pros
This is a great entry-level curing box for small to mid-size projects. It's bigger than anything i'm going to print. It works, and keeps you from jostling your prints when you open/close the door. Great little curing box.
Mini timer which is smaller and portable. Door that swings open and closed is very convenient.
Unique design gives it a stylish appeal. No reason to spend more on a nicer box as this on does the job. Only con is that the plug is a square box, which makes it hard to plug into a power strip with other plugs.
Cons
Wasn't stored plugged. Little super glue helps but out for the box it's impossible. Went right back to amazon.
Highlights
Quality
Assembly is very clever tab-in-slot and an o-ring around the tabs to hold them together.
Light-weight, easy tear-down (if you need to frequently).
Slick design, it went together in about 5 mins and was plugged on and curing prints.
It has a rotating plate and only works when the door is closed.
Price
All in all a must have if you resin print a lot, my only complaint is i wish it was just a bit bigger, i would pay extra if you... Read More
For the money this really can't be beat.
The whole thing is not worth the money.
The item, considering it only cost around 35 dollars, got the job done very well.
Shipping
From the time it was delivered to my front door, to total assembly was about 10-15 min.
Packaging/appearance
The box has a timing device that you set the number of seconds to cure and turns off once complete.
The box also has a door and a switch that disables the light when open.
The box has tabs with slots for o-rings to hold it together, if you dont like that you can print clips to hold it together.
One of the huge issues i have with the box is that i can see the light through the acrylic panels.
Competitiveness
The price isn't bad comparable to other boxes and you have several different materials you can use ut with.
Not as good as some of the name brands but it works and its a nice overall look.
Overview
- How are reviewers describing this item?
easy, great, little, nice and small. - Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
- Our engine has detected that Amazon has altered, modified or removed reviews from this listing. We approximate total reviews altered up to 1.
- Our engine has discovered that over 80% high quality reviews are present.
- This product had a total of 221 reviews as of our last analysis date on Jul 21 2024.
Helpful InsightsBETA
Posted by a reviewer on Amazon
The whole thing is not worth the money
Posted by a reviewer on Amazon
When the lights quit working will put birdseed in it and hang it out side
Posted by a reviewer on Amazon
Honestly no reason to spend more on a nicer box as this on does the job
Posted by a reviewer on Amazon
The timer only goes up to 600 second 10 minutes so you probably will run two or maybe 3 cycles especially for big models
Posted by a reviewer on Amazon
Second to be clear i dont know this for sure it glows really bright when its on and the plastic may or may not be blocking the uv light
Posted by a reviewer on Amazon
The box has tabs with slots for orings to hold it together if you dont like that you can print clips to hold it together
Posted by a reviewer on Amazon
Cons no way to preset times for different size or types of resin
Posted by a reviewer on Amazon
They also come with extra orings in case one or two break which did during construction but that was my fault for pulling too hard
Review Count History
Price History
Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found