What does this mean?Highlights
Quality
This allows the waveshare screen pogo pins to connect to the i2c “1” bus for touchscreen for use with rpi4b.
Txt file after installation via terminal-> sudo nano /boot/config.
The waveshare brightness application may work on the stock rpi image, however it does not work on the custom rpi 4b 64bit image i used.
This screen is probably around 300-350 nits at peak brightness, and is best suited for indoors.
Price
You can manually change the brightness through the following terminal commands instead:sudo chmod 777 /sys/waveshare/rpi backli... Read More
Helpful InsightsBETA
Posted by a reviewer on Amazon
Nits cdm2 must be gt1000 to be sunlight readable
Posted by a reviewer on Amazon
This screen is probably around 300350 nits at peak brightness and is best suited for indoors
Posted by a reviewer on Amazon
When executing the main installation command dont forget to change the i2c bus to “1” instead of the default “0” as indicated on the waveshare readme
Posted by a reviewer on Amazon
Txt and delete or comment out the 34ignore lcd134 at the bottom
Posted by a reviewer on Amazon
Txt the following line to prevent rpi video output problems display default lcd1
Posted by a reviewer on Amazon
The waveshare brightness application may work on the stock rpi image however it does not work on the custom rpi 4b 64bit image i used
Posted by a reviewer on Amazon
You can manually change the brightness through the following terminal commands insteadsudo chmod 777 syswavesharerpi backligntbrightnessecho gt syswavesharerpi backligntbrightness where is a value 0240
Review Count History
Price History
Add Fakespot to your browser, Secure Shopping on the go.
Download Fakespot for Browsers
