What does this mean?Ask Fakespot Chat questions about this productAlpha
Initializing Fakespot Chat
System error,
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found
Pros & Cons
pros
See Details
pros
See Details
Versatility
Customers are highly satisfied with the versatility of the Zeny Plasma Cutter, praising its ability to cut through various materials and adjustable voltage settings. Some have noted missing parts but overall express great enthusiasm for the machine's performance.
Cooling System
Customers have mixed opinions regarding the cooling system of the Zeny Plasma Cutter. While most report proper heat sink placement and effective cooling after use, a few customers had issues with the fan not working and needed to take matters into their own hands for it to function properly.
neutral
See Details
neutral
See Details
Build Quality
Customers have mixed opinions regarding the build quality of the Zeny Plasma Cutter. While some customers reported no issues with the machine after using it for years, others mentioned problems with cheaply made parts such as the air regulator and the start button. Some customers were satisfied with the value and performance but wished for better instructions or American-made equipment. A few customers encountered issues with the unit breaking down soon after purchase and had difficulty getting it repaired due to high shipping costs and unresponsive customer service.
Insulation
Customers have mixed opinions regarding the insulation of the Zeny Plasma Cutter 50AMP CUT-50 Digital Inverter 110-220V Welder Cutting Machine. While some are pleased with its insulation and ability to work effectively on both 120v and 220v, others have encountered issues with the ground clamp and torch cable, suggesting improvements for better contact points and durability.
Patience Required
Customers have reported mixed experiences with the patience required to use this plasma cutter, with some expressing frustration over its learning curve and inconsistent performance, while others have found it worth the investment for the price. Some customers mentioned that they needed additional parts to get it working properly and had to spend extra money on consumables.
Highlights
Quality
This machine works great so far used it twice i tried to cut 1 inch steel had to go through twice but for up to half inch works great
Ran this through its paces on 120v, worked great, was cutting 1/2" steel and aluminum with it.
The air regulator and fitting are cheaply made and the gauge doesn't read psi.
Give the plasma 1/4" spacing from the metal you are cutting and keep air flowing at 60 psi and you will be golden.
Price
It works really well for an inexpensive cutter.
I gave it 5 stars because for the price it's hard to complain.
Let’s be clear, this thing cost less than $200.
For the money you can't beet this machine.
Competitiveness
There ar no american made plasma cutters for anywhere close to this price.
Not only that but it's been used hard and has held up so far, it actually worked better when i got a different brand consumables for it.
I bought some other tips and they worked much better.
Overview
- How are reviewers describing this item?
cut, great, metal, good and better. - Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
- Our engine has detected that Amazon has altered, modified or removed reviews from this listing. We approximate total reviews altered up to 2.
- Our engine has discovered that over 80% high quality reviews are present.
- This product had a total of 191 reviews as of our last analysis date on Dec 6 2024.
Helpful InsightsBETA
Posted by a reviewer on Amazon
I usually cut 14 inch and under material
Posted by a reviewer on Amazon
It will cut probably 38 it doesnt like it but itll do it
Posted by a reviewer on Amazon
The biggest material i used it to cut here at home was 1434 and it sliced right through it
Posted by a reviewer on Amazon
I did try to cut through some 3834 plate and while it did make the cut the dross held the coupon pieces together
Posted by a reviewer on Amazon
I did not try to cut any thicker material but i do not think it will cut up to 1234
Posted by a reviewer on Amazon
Overall it works great but will not cut the at the thickness as advertised
Posted by a reviewer on Amazon
It calls for 45 psi but i turned mine up to 65 psi and it cuts a lot thicker metal and i only wired it for 120v
Posted by a reviewer on Amazon
You do need to wire a new plug on and are gonna have to get some air hose to get it going but i spent under 20 getting all that stuff
Review Count History
Price History
Ask Fakespot Chat questions about this productAlpha
Initializing Fakespot Chat
System error,
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found
Add Fakespot to your browser, Secure Shopping on the go.
Download Fakespot for Browsers
